Buy psilocybe azurescens dried
Buy psilocybe azurescens dried is a species of psychedelic mushroom whose main active compounds are psilocybin and psilocin. It is among the most potent of the tryptamine-bearing mushrooms, containing up to 1.8% psilocybin, 0.5% psilocin, and 0.4% baeocystin by dry weight, averaging to about 1.1% psilocybin and 0.15% psilocin. It belongs to the family Hymenogastraceae in the order Agaricales.
The term wood lover paralysis (WLP) refers to a temporary state of muscle weakness and/or paralysis that begins several hours after consuming certain types of magic mushrooms (aka psilocybin mushrooms or psychedelic mushrooms). The phenomenon appears to occur only after ingesting magic mushroom species that grow on wood, hence the name wood lover paralysis.
In magic mushroom lore, this particular strain of Psilocybe azurescens was discovered by Boy Scouts in Oregon. They first discovered them in the wild in 1979. By the mid-90s, these peculiar, intensely golden mushrooms were found across the Pacific Northwest. Study began on just how potent these psilocybe varieties of mushroom were.
How To Grow Buy psilocybe azurescens dried
This guide is based on Robert “Psylocybe Fanaticus” McPherson’s eponymous PF Tek—the method that revolutionized growing mushrooms indoors. McPherson’s key innovation was to add vermiculite to a grain-based substrate (as opposed to using grain alone), giving the mycelium more space to grow and mimicking natural conditions. Although his method is a little more labor-intensive than others, often for a lower yield, its simplicity, low cost, and reliability make it ideally suited to beginners. It also makes use of readily available materials and ingredients, many of which you may already have.
The one thing you might have trouble getting is a good spore syringe. This will contain your magic mushroom spores and be used to “sow” them into the substrate. Some growers have reported issues of contamination, misidentified strains, and even syringes containing nothing but water. However, as long as you do your research and find a reputable supplier, you shouldn’t have any problems.
In any case, after you’ve grown your first batch (or flush) of mushrooms, you can start filling syringes of your own.
WHAT VARIETY SHOULD I CHOOSE?
As you learn how to grow psilocybin mushrooms indoors, you’ll want to decide on a species and strain. Most suppliers offer a range to choose from, but the Psilocybe cubensis B+ and Golden Teacher mushrooms are among the most popular for beginners. While not as potent as some others, like Penis Envy, they’re reportedly more forgiving of sub-optimal and changeable conditions.
- Spore syringe, 10-12 cc
- Organic brown rice flour
- Vermiculite, medium/fine
- Drinking water
- 12 Shoulderless half-pint jars with lids (e.g. Ball or Kerr jelly or canning jars)
- Hammer and small nail
- Measuring cup
- Mixing bowl
- Heavy-duty tin foil
- Large cooking pot with a tight lid, for steaming
- Small towel (or approx. 10 paper towels)
- Micropore tape
- Clear plastic storage box, 50-115L
- Drill with ¼-inch drill bit
- Mist spray bottle
- Rubbing alcohol
- Butane/propane torch lighter
- Surface disinfectant
- Air sanitizer
- Sterilized latex gloves (optional)
- Surgical mask (optional)
- Still air or glove box (optional)
How To Grow Psilocybe Azurescens Indoors
The basic PF Tek method is pretty straightforward: Prepare your substrate of brown rice flour, vermiculite, and water, and divide it between sterile glass jars. Introduce spores and wait for the mycelium to develop. This is the network of filaments that will underpin your mushroom growth. After 4-5 weeks, transfer your colonized substrates, or “cakes”, to a fruiting chamber and wait for your mushrooms to grow.
NOTE: Always ensure good hygiene before starting: spray an air sanitizer, thoroughly disinfect your equipment and surfaces, take a shower, brush your teeth, wear clean clothes, etc. You don’t need a lot of space, but your environment should be as sterile as possible. Opportunistic bacteria and molds can proliferate in conditions for cultivating shrooms, so it’s crucial to minimize the risk.
STEP 1: PREPARATION
1) Prepare jars:
- With the hammer and nail (which should be wiped with alcohol to disinfect) punch four holes down through each of the lids, evenly spaced around their circumferences.
2) Prepare substrate:
- For each jar, thoroughly combine ⅔ cup vermiculite and ¼ cup water in the mixing bowl. Drain excess water using the disinfected strainer.
- Add ¼ cup brown rice flour per half-pint jar to the bowl and combine with the moist vermiculite.
3) Fill jars:
- Being careful not to pack too tightly, fill the jars to within a half-inch of the rims.
- Sterilize this top half-inch with rubbing alcohol
- Top off your jars with a layer of dry vermiculite to insulate the substrate from contaminants.
4) Steam sterilize:
- Tightly screw on the lids and cover the jars with tin foil. Secure the edges of the foil around the sides of the jars to prevent water and condensation from getting through the holes.
- Place the small towel (or paper towels) into the large cooking pot and arrange the jars on top, ensuring they don’t touch the base.
- Add tap water to a level halfway up the sides of the jars and bring to a slow boil, ensuring the jars remain upright.
- Place the tight-fitting lid on the pot and leave to steam for 75-90 minutes. If the pot runs dry, replenish with hot tap water.
NOTE: Some growers prefer to use a pressure cooker set for 60 minutes at 15 PSI.
5) Allow to cool:
- After steaming, leave the foil-covered jars in the pot for several hours or overnight. They need to be at room temperature before the next step.
STEP 2: INOCULATION
1) Sanitize and prepare syringe:
- Use a lighter to heat the length of your syringe’s needle until it glows red hot. Allow it to cool and wipe it with alcohol, taking care not to touch it with your hands.
- Pull back the plunger a little and shake the syringe to evenly distribute the magic mushroom spores.
NOTE: If your spore syringe and needle require assembly before use, be extremely careful to avoid contamination in the process. Sterilized latex gloves and a surgical mask can help, but the surest way is to assemble the syringe inside a disinfected still air or glove box.
2) Inject spores:
- Remove the foil from the first of your jars and insert the syringe as far as it will go through one of the holes.
- With the needle touching the side of the jar, inject approximately ¼ cc of the spore solution (or slightly less if using a 10 cc syringe across 12 jars).
- Repeat for the other three holes, wiping the needle with alcohol between each.
- Cover the holes with micropore tape and set the jar aside, leaving the foil off.
- Repeat the inoculation process for the remaining jars, sterilizing your needle with the lighter, and then alcohol between each.
STEP 3: COLONIZATION
1) Wait for the mycelium:
- Place your inoculated jars somewhere clean and out of the way. Avoid direct sunlight and temperatures outside 70-80 °F (room temperature).
- White, fluffy-looking mycelium should start to appear between seven and 14 days, spreading outward from the inoculation sites.
NOTE: Watch out for any signs of contamination, including strange colors and smells, and dispose of any suspect jars immediately. Do this outside in a secure bag without unscrewing the lids. If you’re unsure about whether a jar is contaminated, always err on the side of caution—even if the substrate is otherwise healthily colonized—as some contaminants are deadly for humans.
- After three to four weeks, if all goes well, you should have at least six successfully colonized jars. Leave for another seven days to allow the mycelium to strengthen its hold on the substrate.
STEP 4: PREPARING THE GROW CHAMBER
1) Make a shotgun fruiting chamber:
- Take your plastic storage container and drill ¼-inch holes roughly two inches apart all over the sides, base, and lid. To avoid cracking, drill your holes from the inside out into a block of wood.
- Set the box over four stable objects, arranged at the corners to allow air to flow underneath. You may also want to cover the surface under the box to protect it from moisture leakage.
NOTE: The shotgun fruiting chamber is far from the best design, but it’s quick and easy to build and does the job well for beginners. Later, you may want to try out alternatives.
2) Add perlite:
- Place your perlite into a strainer and run it under the cold tap to soak.
- Allow it to drain until there are no drips left, then spread it over the base of your grow chamber.
- Repeat for a layer of perlite roughly 4-5 inches deep.
STEP 5: FRUITING
1) “Birth” the colonized substrates (or “cakes”):
- Open your jars and remove the dry vermiculite layer from each, taking care not to damage your substrates, or “cakes”, in the process.
- Upend each jar and tap down onto a disinfected surface to release the cakes intact.
2) Dunk the cakes:
- Rinse the cakes one at a time under a cold tap to remove any loose vermiculite, again taking care not to damage them.
- Fill your cooking pot, or another large container, with tepid water, and place your cakes inside. Submerge them just beneath the surface with another pot or similar heavy item.
- Leave the pot at room temperature for up to 24 hours for the cakes to rehydrate.
3) Roll the cakes:
- Remove the cakes from the water and place them on a disinfected surface.
- Fill your mixing bowl with dry vermiculite.
- Roll your cakes one by one to fully coat them in vermiculite. This will help to keep in the moisture.
4) Transfer to grow chamber:
- Cut a tin foil square for each of your cakes, large enough for them to sit on without touching the perlite.
- Space these evenly inside the grow chamber.
- Place your cakes on top and gently mist the chamber with the spray bottle.
- Fan with the lid before closing.
5) Optimize and monitor conditions:
- Mist the chamber around four times a day to keep the humidity up, taking care not to soak your cakes with water.
- Fan with the lid up to six times a day, especially after misting, to increase airflow.
NOTE: Some growers use fluorescent lighting set on a 12-hour cycle, but indirect or ambient lighting during the day is fine. Mycelium only needs a little light to determine where the open air is and where to put forth mushrooms.
STEP 6: HARVESTING
1) Watch for fruits:
- Your mushrooms, or fruits, will appear as tiny white bumps before sprouting into “pins.” After 5-12 days, they’ll be ready to harvest.
2) Pick your fruits:
- When ready, cut your mushrooms close to the cake to remove. Don’t wait for them to reach the end of their growth, as they’ll begin to lose potency as they mature.
NOTE: The best time to harvest mushrooms is right before the veil breaks. At this stage, they’ll have light, conical-shaped caps and covered gills.
How To Identify Psilocybe Azurescens
There is an incredible variety of mushroom species in general, and the same goes for the psilocybin-containing ones. So far, there are some 227 accepted and classified species, 53 of which grow in Mexico, 22 in the USA and Canada, 19 in Australia and the eastern islands, 16 in Europe and 15 in Asia. Some of these species overlap in terms of where they grow, some are endemic to certain areas and conditions.
There is no single feature based on which magic mushrooms can be distinguished from regular ones. They come in many shapes, sizes, and colors, and the only way to truly differentiate them is to know their appearance well, and get experience in mushroom hunting.
Psilocybe azurescens are endemic to the West Coast of the USA, specifically to Oregon and Washington. They earn a spot in the top five for having almost the highest concentration of psilocybin out of any magic mushroom species you can find: up to 1.80%. In addition, they have an incredible amount of baeocystin, which is a chemical analog of psilocybin. Compared to P. cubensis, they can contain up to ten times more of this compound by dry weight, which puts them among the most potent magic mushrooms in existence. They are also quite beautiful shrooms, sporting a slim stem and a convex caramel-colored cap with a conical top.
Where To find Psilocybe Azurescens
P. azurescens occurs naturally along a small area of the West Coast of the United States, including in parts of Oregon and California. It has been regularly found as far south as Depoe Bay, Oregon, and as far north as Grays Harbor County, Washington. Its primary locations are clustered around the Columbia River Delta: the first type collections were made in Hammond, Oregon, near Astoria. It is also quite prevalent north of the Columbia River in Washington, from Long Beach north to Westport. Some feral specimens have also been reported in Stuttgart, Germany. While infrequent, the mushroom can sometimes be found around decaying wood in the Willamette Valley of Oregon. Ilwaco, Washington also has a large population, but harvesting is a potential felony that is enforced by local law enforcement agencies.
The species’ preferred environment ranges from caespitose (growing in tight, separated clusters) to gregarious on deciduous wood-chips and/or in sandy soils rich in lignicolous (woody) debris. The mushroom has an affinity for coastal dune grasses. In aspect it generates an extensive, dense, and tenacious mycelial mat (collyboid). P. azurescens causes the whitening of wood. Fruitings begin in late September and continue until “late December and early January”, according to mycologist Paul Stamets. Psilocybe azurescens has been cultivated in many countries including Germany, the Netherlands, New Zealand, the United Kingdom, and its native United States (especially in California, New Mexico, Ohio, Oregon, Washington, Vermont, Wisconsin, and Pennsylvania).
We recommend starting at the medium experience level if you have not tried them before, as the visuals can be quite intense and harder to handle for inexperienced users. Set and setting are extremely important for a positive experience. We also highly encourage people to have a guide or sitter if they are new to psychedelics.